wanting to upgrade from rtr transmitter. suggestions?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
B

brad1161

Well-Known Member
Messages
203
Reaction score
0
I have two rtr trucks and would like to upgrade to a better transmitter/receiver. One is a 1/10 scale brushless and other is a Rampage MT. Not looking for the best. Just better.
 
Fly Sky F-S GT 3 B . There is no better deal. $40 bucks, additional recievers are 7 bucks. This puppy holds 10 cars. You must have a printer to download -print the manual. This is a 3 channel rig. a must have to run a kill switch.
 
caveman? you there? - I bolted up the ddm torquer stack. its on a CY 29. -with 990, jetpro rear. In my humble opinion- on this engine- This stack is the way to go. no question. I think the advantiges would be even more profound on a truck.- with your HY 30. this set up is far more easy to tune the lo speed fuel needle--- On other engines- my results do not apply.
 
Your pretty quick to try things and reply about it. Thanks for the info I'll be looking into it. Now waiting for gizmomotors to get the 990 back in stock.
 
yea, i am on the wrong thread -- agan. cave? the 990 feeds a lot of fuel. With the mild porting the HY30 has, there are other carbs that could work as good or better than the 990- and have a choke too-- The 990 works real good in colder weather - cold makes engines go lean- A carb with a smaller bore has a stronger fuel signal- @ lower rpm-s- Just my opinion--
 
Back
Top