What are the bearing size on the diff plate???

[98cruiser]

I have an MT, ive seen where the bearings on the (diff) gear plate seeze up and the melt and break the plate, instead of buying an aluminum plate (trying to stay light), Ill try upgrading the bearings first, looks like it's three, what size do I need to look for??? thanks guys!!!!!!

 

[BertR]

You need four 22x8x7 and one 26x10x8 and one 22x10x7 that is the hard to find one or you can get the set at largescale for under 20 bucks

 

[maddmike]

They have the full bearing kit on sale for there ridiculous sale today for 30

 

[BertR]

I saw that as well... thats a good deal on the whole monty lol I would pick up that and do everything and have pice of mind or use part # 1070 and get the plate set to save on cash now and pay more later when you need everything.

 

[98cruiser]

You need four 22x8x7 and one 26x10x8 and one 22x10x7 that is the hard to find one or you can get the set at largescale for under 20 bucks

Thanks guys, but who do I know if they are the same quality as redcat or better when it doesn't say the manufature's name like (fasteddy)ect... it just says bearing kit

 

[BertR]

They blow redcat out of the water on durability and are just as good as fasteddy. I am running that bearing set and have had no problems yet with massive run time on them. In my opinion don't pass up a deal on them that is this good

 

[98cruiser]

I saw that as well... thats a good deal on the whole monty lol I would pick up that and do everything and have pice of mind or use part # 1070 and get the plate set to save on cash now and pay more later when you need everything.

will #1070 from largescalerc replace all the bearings in the diff plate??? I thought it was three bearings total??? maybe im wrong, how many are just on the plate

 

[BertR]

That will do the plate..complete. there is more than 3 on the plate

 

[maddmike]

The whole vehicle kit is the best deal

 

[andyken]

I have an MT, ive seen where the bearings on the (diff) gear plate seeze up and the melt and break the plate, instead of buying an aluminum plate (trying to stay light), Ill try upgrading the bearings first, looks like it's three, what size do I need to look for??? thanks guys!!!!!!

Also, the type pf shield makes a difference.

There is metal, teflon, rubber etc.

Rubber seems better to keep dirt out.

 

[98cruiser]

They have the full bearing kit on sale for there ridiculous sale today for 30

thanks Rampage, is this the one your talking about for the whole truck?? is so it says $44 not $30, unless they went up in price, im want to change the bearings for the axels too, I see they go bad as well http://www.largescalerc.com/rampagettandmtcompletebearingkit30piece.aspx

 

[maddmike]

That was a sale they were running that day. But yea that's the kit

 

[jeffp83]

I changed over my entire truck to these KML bearings found on eBay.. here's the 22 x 8 x 7 but they do carry all the sizes we need.

They work great, they're rubber sealed and dirt cheap.

 

[98cruiser]

I changed over my entire truck to these KML bearings found on eBay.. here's the 22 x 8 x 7 but they do carry all the sizes we need.They work great, they're rubber sealed and dirt cheap.

thanks Jeff, but are those the correct size for the axels?? what size do I need?

 

[jeffp83]

These are the ones for the wheel axles.

 

[jeffp83]

608RS (22x8x7) will replace four of the bearings in the gear plate, and one 6000 2RS (26 x 10 x 8)

 

[98cruiser]

I changed over my entire truck to these KML bearings found on eBay.. here's the 22 x 8 x 7 but they do carry all the sizes we need.They work great, they're rubber sealed and dirt cheap.

Thanks jeff, just ordered 8 for my MT!!