Wheel Wobble

[Dreggsta]

Anyone else have this? I guess I'm no too worried about it. I noticed it when I was spinning the wheels by hand when I turned the rear the front turns & it has a lol sided look. When I turn the front the rear has the same effect. Man WTH??? Lmao

 

[BertR]

It may be your cv's in the front binding just enough to raise and lower the SUS arm a tad but not enough to stop the wheel from turning.

 

[Dreggsta]

Ten fo Bert. The rear does the same thing.

 

[rcspeedmart]

Have you checked your bearings to see if they have wore out?

 

[Dreggsta]

I just put in 7075 hubs w/oversized bearings. I'm not too too worried about it. I was curious to see if other people noticed this. If this is good ole Chinese fit & finish lol.

 

[rcspeedmart]

Oh ok yea if you are using ol fart parts you are good what about the c hubs are you using ol farts c hubs also?

 

[Dreggsta]

No sir, I didn't want to go all out on aluminum so I intentionally kept some things plastic to absorb shock & to try & create crinkle spot if something were to break.

 

[rcspeedmart]

Ok I understand but the small screw and the shaft on the plastic c hubs wears out quickly and it will cause your wheels to wobble also when this occurs it is a bear to get that screw out the last time I had to cut the c hub in half just to take it off and add the ol farts upgrade so that could be the problem.

 

[Dreggsta]

Ok that's good to know. I guess I'll start saving up for them. Thanks for the heads up.

 

[rcspeedmart]

Now that may not be your problem check to make sure first but it is a well known common problem.