Where to start with fixing front wheel hop while turning?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Strider1

Well-Known Member
Messages
101
Location
Central Ca. SLO
I’ve read droop screw adjustment, shock adjustment, shock oil change, spring change, tire balance.....all I know is it should not wheel hop while turning.....and it does.....lol
Any suggestions as to what to start with first in the process of elimination would be appreciated ?
 
we all get a certain amount of wheel hop. the camber should be set to 1.5 degree which is a good foot print and 0 degree toe in. Use 30 weight oil in the shock and adjust the preload. The suspension need to absorb the surface conditions. If the oil is too thick it will bounce and if you have too much preload. I have the same problem in the rear, when im on the gas she is going and if you it a bump or rut the ass end flys up in the air .just need to find a happy in between good luck machine head!!!
 
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks