Which engine?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
C

chefjness

Well-Known Member
Messages
69
Reaction score
0
BIG 4x4. I know the 23 wont cut it. What engine will drop right in and make this this haul?


Cheers,


John
 
I am sure a nice 28cc head kit or 30.5 head kit is just what the doctor ordered. I do believe rampagehopups sell's the 28cc head kit's for these at a reasonable price. Or the usual ddm or tgn.
 
hellya..............Which Dom pipe will work with this truck and how will it mod up ????


Thanks


J
 
Last edited by a moderator:
redcatmt said:
hellya..............Which Dom pipe will work with this truck and how will it mod up ????
Thanks


J
Click to expand...
Baja dominator made my 23cc engine come alive a my KM baja... I saw the pipe mounted to the Rampage in a video and I like the performance


They had a 30.5 in the truck too.


heres the video

 
Last edited by a moderator:
I hadn't seen that second vid with the dominator pipe, looks like it really works well with the Rampage and the 4WD system to create alot of bottom end torque.
 
hellya said:
Baja dominator made my 23cc engine come alive a my KM baja... I saw the pipe mounted to the Rampage in a video and I like the performance
They had a 30.5 in the truck too.


heres the video

Click to expand...
Are you saying that this vid is with the domonator pipe (obviously I see it) AND a 30.5. What kind of mod does the pipe need to work with the MT. It looks like it was extended to reach the head.
 
The pipe fits pretty well with just chopping off the header pipe about halfway along and adding a chunk of tubing, I suggest something a little better then heater hose tho, we burnt thru it in one tank. THe combo made a lot of bottom end torque, actually too much, going to gear it up and see what kind of speed we can gt out of it, bought the buggy 29 tooth gear, see what that does. taking it out tomorrow, will have more vid.


Also fixed the diff and installed the hardened dowel pins, see if they'll hold up.
 
I ordered me a 29cc race ported headkit with 2mm stuffed crank from DDM today. Will be ordering an x-can and some shock springs from Rob as soon as he gets a red one.
 
RampageHopUps said:
Don't go crazy with the power yet. Unless you want to upgrade some other parts first. I would put MCD dogbones in if you are going for the 30.5.
Click to expand...
Are the MCD dogbones a direct fit? And what else is a beefer part that is a bolt on from the MCD?


Skater
 
Back
Top