Which killer be killswitches will work with stock dsm-2c?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Melski415 said:
I need to buy a killswitch. Which one would fit a stock radio?
Click to expand...
http://www.killerrc.com/product/super-bee-kill-switch-car-kit/

Link above is for the kill switch but in order to work with a stock radio you will need a 2 way splitter cable to connect the kill switch with the steering servo...since the stock radio doesn't have the third channel.

link for the 2 way splitter cable

http://www.killerrc.com/product/2-way-splitter-cable/

but if you don't mind my 2 cents go with the flysky fs gt3b awesome radio and great value for what it does. U can get it at descent price on ebay.

http://www.ebay.com/itm/150987084772?ssPageName=STRK:MEBIDX:IT&_trksid=p3984.m1426.l2649
 
i don't know what anybody else is thinking here but you can use the killer bee with stock radio without any mods. just follow k/b directions and if you need to kill the truck for any reason you just have to turn off power on t/x once signal is lost k/b will kill motor and stop a runaway. no 3 channel radio needed.
 
blak__jak said:
i don't know what anybody else is thinking here but you can use the killer bee with stock radio without any mods. just follow k/b directions and if you need to kill the truck for any reason you just have to turn off power on t/x once signal is lost k/b will kill motor and stop a runaway. no 3 channel radio needed.
Click to expand...
Yes that what he is talking about but you will have to have the 2 way splitter cable for it to work.
 
What is the part # for the stock rx? My antena let go, looks like it's a coaxail [2 wire?] was going to solder it back on but kinda small for my eyes :)
 
Back
Top