Which servo's?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Clubin

Clubin

Well-Known Member
Build Thread Contributor
Messages
3,896
Reaction score
2,281
Location
Manitoba
I am going to upgrade the servo's rite off the hop when I get my Rampage, which servo's are you using?


I will install a ACE 1015 for t/b I use them in everything and have had real good luck with them.


What is a good steering servo Hitec 5745?
 
Read in your manual for the Radio then I know the DXR has this feature may not be labled as HRS like Futaba and Airtronics, I am not expert on DXR but it is a high end radio that will have a mode for running all digital servos,


This will help the response time of the servos incredibly. Don't let the 249 oz in tourque of the 5745 fool you it is a monster in holding torque and that is where it shines in 1/5 scale.


You want power you can feel and see with consistancy too get a Lipo a Castle creations regulator and wire it all up with AMS servo direct harness from DDM. you will have power to spare.
 
For steering rhino digi4, got one in my fgbaja...best there is apart from an oddified tonegawa. 373ozin initial with 280ozin holding and super fast, i had to tone down on the proportion setting to slow it down a bit. And if you ordered your rampage from van hobbies you get a free 645 servo chucked in, it's not digital but should work with most dsm handsets, i know it works with the nomadio react...or you could ebay it and buy a digital one
 
Last edited by a moderator:
Back
Top