XB-E Baja conversion

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
B

BigWheel1

Contributor
Messages
23
Reaction score
1
Location
Ft Campbell, KY
With the really cold weather I've broken a bunch of parts so I decided to convert my XB-E into a Baja. Still waiting on a few parts, but here is what I've done so far. I used the 7075rc chassis to lengthen the wheel base, Ramtech adapter so I could install some Pro-line bowtie tires and shortened a King Motor T1000 body.


2b0a2ae6a108c89e3be52b6c38ffdee6_zps415b94ff.webp


2f3c55f49e46d53811aef72473338b39_zps4b71b8b7.webp


084d36699514032b6392d3f95c2db5e0_zpscdd61e8b.webp


a0b29c3d2adf95ce67e24b1cf2757b05_zps07afe3b8.webp
 
I just noticed you don't have a motor mounted yet. What are you planning on running?
 
I'm waiting on some bullet connectors to put in a Leopard 5692 1340Kv motor and CC XL2 ECS using a 48T spur & 12T pinion. I'll run it on 6S so hopefully overheating won't be problem.
 
I finally found some time to finish this project. It's a blast to drive! I'm going to add a separate battery for the steering servo, ESC fan and two motor fans. The servo is a little slow and I can hear the fans slow down when I test the steering.

070255626438cf324675f61610350c5b_zps13eeef9a.jpg


40e38fa5bc7103b59e2f02d38b4d8d5c_zps7e9aaeef.jpg


cb8bc0e620656a7eac6a359311980481_zpsfb1d87ec.jpg
 
XB-E Baja conversion

The XL2 didn't hold up. It caught on fire after a few runs. That's what I get for running outside the specs.

1706ec79950dc072f83559548857e767_zpsfe7f1e49.jpg


I'll change over to the CC 2028 motor. Found the XL2/2028 combo on eBay at a good deal.
 
Last edited by a moderator:
Man these castle xl2 esc have a very bad reputation for going up in flames for 1/5 RC's id say go MGM all the way well worth the money
 
Over 25lbs plus 4WD increases the load on it. You have to keep the gearing really low. Higher voltage keeps the amps down, making it more efficient.
 
Back
Top