XBE refit with KD mounted TP5660 1100Kv

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
bigfol said:
Wait until you see what happen's when to set the torque limit setting to 10/10,you'll be impressed then...... ;)
Click to expand...
You first! I'm planning on keeping my drivetrain in one piece thanks very much:D

I also have an TP 1000kv 5Y motor which I was going to put into an e-baja 5b. I was actually thinking it might be better in the XBE and the revvier 1100kv in the Baja.

N
 
ninjagaiden said:
You first! I'm planning on keeping my drivetrain in one piece thanks very much:DI also have an TP 1000kv 5Y motor which I was going to put into an e-baja 5b. I was actually thinking it might be better in the XBE and the revvier 1100kv in the Baja.

N
Click to expand...
Hahahaha, your drive train will be fine it can take it, I running my torque setting 10/10 with 16t pinion and 46t spur, running high torque settings will really wake-up your motor. :D
 
What is it with me and pinions?

Took the car out for a spin this evening. Because I only have puny 30c lipos for my *s setup I turned ESC power to 75% and torque to 4.5, running 12T pinion and stock wheels.

Boy, the difference between the 40xx can and the 56xx can is like night and day. Instead of wheezing along the 56xx can pick the buggy up and give it a boot! On this v gentle setup I had Motor at 35C, ESC and lipos at 30C. Then the pinion came loose and the fun stopped! I remembered that last time I was wrenching I'd put the car away before I had got the loctite out, so I had not had a chance to loctite the set screw on the pinion. That will teach me!

But I am dead pleased with how the thing ran! When I get my 45C cells it WILL be awesome!
 
The Fightercat esc's deal with the anti-spark with a built in system that needs work with the battery hook up I used 8mm and used 2 set on the negitive side.

Here is a video of how it works.

[ame]

[/ame]
 
BoukeG said:
Don't you need to unplug the anti-spark after connecting the mains and put load on the system?
Click to expand...
Thats what I would be doing, unless the bloke wants to melt his 4mm connector, I see people do this often and then wonder why their connector melted.......... :confused:

I think they forget its only meant to be used as a anti-spark device only...... ;)
 
Last edited by a moderator:
I have this set up your talking about on my esc. I'm running it on 8s and stock motor at the moment. I will be running a bigger motor soon. Here is some thought on a clean and low center of gravity lay out for these big esc's.

RampageXBE003_zpsa7d14515.jpg


RampageXBE001_zps18bc9ae0.jpg
 
Back
Top