Zenoah G320 8k Clutch?

[tizdaz]

Hi guys, what is the stock clutch on a Zen G320?

I want to upgrade to a 8k clutch, but i tried an 8k clutch spring i had but it don't seem to fit (clutch spring was for a zen 29cc) is clutch spring different on the 32?

If so what spring do i need, or would i be best just replacing whole clutch as 1 unit?

Cheers!

 

[Rep732]

Fs steel clutch has the 8k spring.

Stock zen clutch I believe is 6k rpm

 

[tizdaz]

This one?

https://www.rcmodelz.co.uk/fs-racing-54mm-full-metal-clutch-shoes-w-8k-rpm-spring.html

Will it fit the zenoah g320?

Because i bought these not long ago but they don't seem to fit thebg320!
https://www.rcmodelz.co.uk/clutch-spring-8000rpm-red-pair.html

Cheers

 

[spents]

This one?

https://www.rcmodelz.co.uk/fs-racing-54mm-full-metal-clutch-shoes-w-8k-rpm-spring.html

Will it fit the zenoah g320?

Because i bought these not long ago but they don't seem to fit thebg320!
https://www.rcmodelz.co.uk/clutch-spring-8000rpm-red-pair.html

Cheers

yes that clutch will fit the g320 mate,
and will be fine using the zenoah shouldered clutch bolts as well ,
those clutch springs will work on any 54mm clutch as well, i bought the same ones from rcmodelz ages ago,
they are a tight fit and need some wiggling to get em on right though

 

[tizdaz]

yes that clutch will fit the g320 mate,
and will be fine using the zenoah shouldered clutch bolts as well ,
those clutch springs will work on any 54mm clutch as well, i bought the same ones from rcmodelz ages ago,
they are a tight fit and need some wiggling to get em on right though

thanks buddy! in the end i went with the steel clutch, all fit and tested, works perfect cheers!