Factory/Standars carb settings for Zen23 marder.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Brucie

Active Member
Messages
34
Location
Northumberland UK
Hi all,

I've just gone to start my marder for the first time since getting it, but it wont start :censored:

Its got a good spark and its getting fuel, so I'm wondering if my mates kids have been tinkering with the carb settings while it was sitting at his place.

Does anyone know how to set it back to factory standard settings :confused:

Cheers,
Lee
 
as stated by zenoah, the following should be the correct carb settings

H needle : 1 3/8 + or - 1/4
L needle : 1 1/4 + or - 1/4
 
Thanks fella's

Set the carb as advised and fitted a standard exhaust.
Three pulls it tried to fire, one more pull and a tweak on the choke and hey presto she came to life :D

Now I need to get myself a failsafe and a kill switch ohh yea and a 2.4ghz tx-rx (When i can afford to that is)

Much appreciated,
Brucie.
as stated by zenoah, the following should be the correct carb settings

H needle : 1 3/8 + or - 1/4
L needle : 1 1/4 + or - 1/4
 
There are a few decent 2.4ghz budget sets out there now. I bought a Code Core RC stick set (by Schumacher) for £85 and there is a new stick set out for £69 which looks identical in all but name. There are about 6 wheel sets to choose from with the Ansmann W3 for about £70 being popular on here. These all have built in fail safe settings.
 
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks