Search results

Here's a few that I had before I started transferring all the parts over from my MB. How does the Kamitrio kit run? I thought about getting one but got a good deal on the Heiss kit.

Well I finally got my kit together, and all I can say is WOW! This thing wil run over anything. It seems to have lost a little of the low end snap, but I haven't adjusted the needles for the DDM pipe yet. If anyone is considering getting a 4X4 kit I highly recommend you take a look at this kit...

About 2 bucks for the angle. 30 cents for the bolt and nut. Tubing and skateboard wheel I had lying around.

Just to add some side to side strength. The second pic is what I'm running now, the first and third was the first attempt. I used a thinner angle and it bent on impact from a bad landing. I switched it over to 3/16" and haven't had a problem since.:)

Here's mine. Wasn't hard to make and it raised the diff up about 3/16 of an inch. I just drilled some angle to match the holes in the rear end of the chassis, and added an old skateboard wheel that my son had lying around with a bolt for an axle. Works pretty good and keeps me from denting up my...

I remember something about RCNH putting one together but I think things have been kinda busy there ( that time of year with the weather changing and people spending tax returns). As for the other install on a marder, if it's the same one I thinking of, it turned out the problems were from a bent...

Has anyone tried one of the 4x4 conversion kits by Kamitiro? I was thinking of getting one for my MB but I haven't heard anyone's opinion on how they perform. http://www.rcnutshobbies.com/product.cgi?group=33120&product=36845 Thanks James

Jaw Dropping. Great job Simon.

Well, my first try didn't work too well. The angle bent after a hard crash. So I just went up to the next thicker size that I could find available. As far as the size, I wanted it wide enough to go under the diff and rear lower arm mounting holes, and still be able to drill the holes into it...

Had too add this one it's one of my favorites.:clown:

It does a body good to vent once in a while.:2guns: Glad to see all the vids made it over as well. Maybe I'll get off my butt and get some of the stuff I have put together into something worth viewing. Thanks for taking the time to bring all that with you Bigger. I know it must have taken...

Here's a few pics of my homemade one. The angle keeps it from bending, and it's under the arms and diff mounts. The thinner one bent after a few hard landings so I made it out of 3/16" by 3/4" aluminum angle, and haven't had any problems since. You will definetally need some type of wheelie-bar...

I'll second that! Let's see it naked.:) Paint job looks great Simon.

Yea, had to do something with the jetpro dragging the ground every time I got on the throttle. Wasn't hard to make and it raised the diff up about 3/16 of an inch. I just drilled some angle to match the holes in the rear end of the chassis, and added an old skateboard wheel that my son had lying...

Here's a few of mine.