Hi guys,
Have an interesting problem with my 320rc. Sat for a few weeks and just got back to get the machine running again but no luck. Fuel was pouring out of the bottom of the air intake of my KV5TT so I ended up replacing the carb with a new WT-1107. Replaced the carb gaskets, and the insulator manifold gasket. Still no luck.
Multiple new plugs have been used and no luck. If I pull the carb and pull the chord it fires up right away. If I put the carb back on I get nothing.
Although after I clear the gas out with no carb, and put the carb back on... that first pull with carb on it will turn over then die right away. Then won’t turn over after that until I pull the carb back off. Crazy and I feel like I’ve tried everything.
thanks for your help!!!
Have an interesting problem with my 320rc. Sat for a few weeks and just got back to get the machine running again but no luck. Fuel was pouring out of the bottom of the air intake of my KV5TT so I ended up replacing the carb with a new WT-1107. Replaced the carb gaskets, and the insulator manifold gasket. Still no luck.
Multiple new plugs have been used and no luck. If I pull the carb and pull the chord it fires up right away. If I put the carb back on I get nothing.
Although after I clear the gas out with no carb, and put the carb back on... that first pull with carb on it will turn over then die right away. Then won’t turn over after that until I pull the carb back off. Crazy and I feel like I’ve tried everything.
thanks for your help!!!
