Brand new Marder over fueling...help!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

911jonny

New Member
Messages
3
Hi, Today i tried to start and run in my brand new Marder with Zenoah 26cc engine. She tries to start but will not run as i seems to be over fueling. I checked the needles settings and they were correct according to manual. I also tried them at 1 1/2 turn high and 1 1/4 low with no affect. The only way she will start if you pinch the fuel line and pull starter. She will run for about 5 seconds and when you release the fuel pipe it will flood itself! I managed to get it to tick over by winding the low needle to 3/4 turn from closed and the high 1 turn from closed... but its still miles too rich and will not respond to throttle as it bogs down and then stalls.... advice please as im new to petrol
 
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks