Clone pipes

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
pyroM!ke247

pyroM!ke247

Well-Known Member
Messages
249
Location
Oklahoma
Last edited:
I would definitely be interested in your findings on the victory clone. I have been considering one myself
 
pyroM!ke247 said:
I see very little info on these pipes.. Surely alot of people have ran them. There clones of the ddm rear dom, victory rc, and cpi. I just ordered the victory clone. Ill try it and give feedback..

victory rc
https://www.ebay.com/itm/Steel-side...132773&hash=item3b083feac3:g:rSoAAOSwUn9aQynu

ddm rear dominator
https://www.ebay.com/itm/High-Perfo...295243?hash=item542255b58b:g:OnQAAOSwdzVXvm8~

cpi
https://www.ebay.com/itm/New-King-M...817647&hash=item466ac1b455:g:c4AAAOSw94taAxoz
Click to expand...

I've got a Thor that I've never used.
Weighs nearly as much as the car.
 
Noise don't bother me. I have a real rear dom v2. It's loud but if it's 15 feet away it's not so bad. I was hoping someone would comment on the vrc clone side pipe.
 
Got the vrc clone in... It actually looks like a decent pipe. Nice beefy header and the pipe itself seems good.I'm gonna use this mount. http://www.davesmotors.com/Victory-RC-Side-Pipe-Bracket-for-VRC-Pro-Side-Pipes.html
Prolly gonna have to beef up the mounting tab on the pipe it doesn't look up to par. Ill run it till it breaks then ill prob strip it beef it up and paint it black..But for 55 bucks I have to try it.I like that it's 2 piece..20180426_122310.jpg 20180426_122335.jpg
 
The mount that comes with the kit makes it stick out way too far. So I spun the pipe1/4 turn made a mount out of one of the roll cage support mounts( the mount on the left, http://www.rovanrc.com/roll-cage-bu...support-mounts-and-engine-brace-mount-silver/ ) and a small socket, it mounted up perfectly through the tank mount hole. It's even rubber mounted through the tank grommet. Fits like a glove now. One screw takes it off! I love this pipe. Only thing I can gripe about is since I rolled the pipe a 1/4 turn the exhaust stinger points directly at the front tire.but I don't see it as an issue.20180428_120240.jpg 20180428_120200.jpg 20180428_120126.jpg 20180427_214026.jpg 20180427_213504.jpg 20180427_212539.jpg
 
Last edited:
I've never ran a cloned pipe (think so anyway, had too many cars in the past) I have had Jetpro..ok mid and top end ,crap on acceleration.GBE side bleed...one of the best pipes out they for all round. DDM..dozens of them..excellent pipes. FG , superb as well. Victory RC , nice accel,mid but a bit too loud.

J
 
pyroM!ke247 said:
The mount that comes with the kit makes it stick out way too far. So I spun the pipe1/4 turn made a mount out of one of the roll cage support mounts( the mount on the left, http://www.rovanrc.com/roll-cage-bu...support-mounts-and-engine-brace-mount-silver/ ) and a small socket, it mounted up perfectly through the tank mount hole. It's even rubber mounted through the tank grommet. Fits like a glove now. One screw takes it off! I love this pipe. Only thing I can gripe about is since I rolled the pipe a 1/4 turn the exhaust stinger points directly at the front tire.but I don't see it as an issue.View attachment 45541View attachment 45542View attachment 45543View attachment 45544View attachment 45545View attachment 45546
Click to expand...
That is going to blow oil all over your front tire. Don't forget to make a video . I would like to hear it running.
 
Back
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks