DBXL 2.0 Dbxl 2.0

[Outseen124]

So my gear went can’t seem to find how to aligned it’s not lose Dbxl 2.0 gas

 

[Clubin]

Gears look good. You need to be properly set the lash. Looks like hex is stripped out of pinion gear?

 

[Seandonato73]

Time for a vertigo upgrade.

 

[aperson]

Flip the little spacers for the engine mount screws the other way around should line everything back up.

 

[Outseen124]

Flip the little spacers for the engine mount screws the other way around should line everything back up.

The ones underneath?

 

[aperson]

The ones underneath?

Yep. They all should be facing the same direction as well.

 

[tizdaz]

Flip the little spacers for the engine mount screws the other way around should line everything back up.

This once correct, rhe mesh will be 100% spot on.

 

[rajul]

@Outseen124. Here's a photo showing the correct orientation of the four spacers.

 

[Seandonato73]

Oh heck throw them in the trash and use washers.

 

[Rep732]

The question nobody asked is how did the mesh get so far out but it was assumed the mesh inserts are on backwards without the op mentioning he took them out.