DBXL 2.0 DBXLE 2.0 any help would be appreciated vitavon mods

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
N

NismoRCGuy

New Member
Messages
1
Reaction score
1
Hello guys I'm new here and have a question regarding my current build.
I have a DBLE 2.0 and I have basically everything from the vitavon catalog for my rig, I'm also running the max 4 and 560kv combo with a beast 1000 steering servo, just to list the mods. I've just finished putting the rig together and I've noticed the front diff case by vitavon is touch the cross bat for the vitavon bellcrank when turning the steering without the servo attached. I'll try and take a photo tomorrow.
I'm new to RC cars, but do real cars all the time and lots are similar. so most thinks come naturally and the last rc car I had was a radioshack silver arrow..I don't know how this will compare, but I think I over killed it, hopefully I don't hurt myself. in the photos everything looked small and I feel I have bite off more than I should. I blame youtube and friends. lol.
thanks in advance
NismoRCGuy

20240710_173849.webp

20240710_124748.webp

20240710_123215.webp

20240710_130154.webp

20240710_201102.webp
 
Looks like you don't have servo in so your steering <Travel > ,end points , are going further than they will once you've built everything. Get your buggy built,make sure to power on radio then buggy ,get servo centered, then attach steering arm and adjust everything from there. It's pretty easy but critical to get steering endpoints set up or you'll burn up servo.....l am a Vitavon user also and very happy with their parts !!! Also auto tech that really enjoys rc , it's all the same, 50% smarter than what you're working on and 50% smarter than the tools you're using !!!!!!!
 
Back
Top