DDM Bite Screws for Raminator?

[RickDizzle]

I would like to run the DDM Stainless Bite Screws for my Raminator's black beadlocks so I have a little contrast with the stainless heads.

I am not confident they will work. The stock Raminator beadlock screws are M3x12. The DDM bite screws say they are 2.5mm metric allen heads. I am 99% sure an M3 is 3mm so my thought is the DDM ones are too small and will NOT work.

Anyone available to confirm this for me?

 

[deathrawt]

Wish I could help but I don’t have the ddm screws so can’t compare them to the ram ones
Might have to just take a screw to fastenal and see if they have what you need
I wouldn’t try a wrong size screw as you might strip out the rim threads

 

[RickDizzle]

Wish I could help but I don’t have the ddm screws so can’t compare them to the ram ones
Might have to just take a screw to fastenal and see if they have what you need
I wouldn’t try a wrong size screw as you might strip out the rim threads

Yeah fully agreed. Pretty sure the DDM ones are too small.
M3 is a 3mm correct?

 

[deathrawt]

Pretty sure it is a 3mm

 

[Jshaff16]

Correct.

 

[RickDizzle]

Thank you!