DDM Bite Screws for Raminator?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

RickDizzle

Isaiah 41:10
PLUS member
Build Thread Contributor
Messages
1,375
I would like to run the DDM Stainless Bite Screws for my Raminator's black beadlocks so I have a little contrast with the stainless heads.

I am not confident they will work. The stock Raminator beadlock screws are M3x12. The DDM bite screws say they are 2.5mm metric allen heads. I am 99% sure an M3 is 3mm so my thought is the DDM ones are too small and will NOT work.

Anyone available to confirm this for me?
 
Wish I could help but I don’t have the ddm screws so can’t compare them to the ram ones
Might have to just take a screw to fastenal and see if they have what you need
I wouldn’t try a wrong size screw as you might strip out the rim threads
 
Wish I could help but I don’t have the ddm screws so can’t compare them to the ram ones
Might have to just take a screw to fastenal and see if they have what you need
I wouldn’t try a wrong size screw as you might strip out the rim threads
Yeah fully agreed. Pretty sure the DDM ones are too small.
M3 is a 3mm correct?
 
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks