Exhaust Removal/Swap

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

monsterman

Well-Known Member
Messages
64
Location
Long Island New York
Hey guys a quick question..

Going to be swapping my exhaust out soon and was wondering after replacing is it ok to just use a new gasket or should you also use some sort of sealant? If so what kind??



Thanks
Chris
 
Also before you install your new pipe take a strait edge and check the flange surface to make sure its flat some need to be resurfaced from the welding process and its also A good idea to check the head for the same thing..If there flat you should not have to many problems with it holding a good seal..
Hers' a pic to help show what Im talking about.
IMG_1521.gif
 
Thanks for the picture YamahaDude, so a straight edge razor is what would be needed if anything needs to be cleaned, removed? What about a dremel tool?? Would that also work or could I run the risk of taking "to much off" and you are saying both sides Pipe end and engine exhaust outlet right?



Thanks
Chris
 
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks