FG Servos Upgrade

[Gunfanatic]

Hello

I am looking to upgrade the servos in my gas FG Monster truck. I would prefer to use Hitec Servos. What would you suggest?


Thanks

 

[DougStar]

I have a hitec 845 for steering and a savov 1211 for throttle. I did have to re drill the throttle brace so I could move it a few mm to the left., the hitec is quite large. Now I can use a lipo

 

[Gunfanatic]

I have a hitec 845 for steering and a savov 1211 for throttle. I did have to re drill the throttle brace so I could move it a few mm to the left., the hitec is quite large. Now I can use a lipo

Which lipo did you end up using? I'm thinking I might have to do the same. Im curious why didnt you use Hitec servos for both. thanks

 

[DougStar]

I use a killer rc 7400 . The servos are both water resistant. I run the savox 1211 in all my bajas + the mcd good servo

 

[Gunfanatic]

I use a killer rc 7400 . The servos are both water resistant. I run the savox 1211 in all my bajas + the mcd good servo

Would it be possible to run hitec 845 for both? So they can match while in the truck.

 

[DougStar]

No its not possible the savox i use is more that adequate for the job i use the same servo on a custom baja that weighs in at 20kg works

 

[MonsterAir]

That Savox is a good bang for the buck. If you got money burning a hole in your pocket and wanna stick to hi-tech take a look at this monster.

https://www.hitecrcd.com/products/servos/digital/d-series/d980tw/product

 

[BCRstudio]

Or this one..
https://www.promodeler.com/DS2685BLHV

I have bought about a dozen servos from John, great fellow when he has time to talk on the phone (otherwise, he will call the next day if you have any issues)

My 0.000000015 cents worth.