Front hubs

[Busa169]

Hi,

Can anyone tell me if either Lauterbacher super X or Hormann HT1 front hubs will fit an FG ?
Or do FG do a front hub to take Hydraulic brake calipers ?

I have modded some alloy FG font hubs to take some Laut hydro's, but they don't seem to be holding up too well.

Thanks
Daren

 

[Shiny]

Sorry man cant help you there.

 

[Ducky]

FG make the alloy front hubs you need for hydros, normally always the odd pair going cheap on Ebay.

Here's a set, pricey but you can find them for around £40 new on Ebay if you're prepared to wait.

Alloy Hubs

 

[Bigger the Better]

I have a set on my MT. Brakes mount in the rear so as not to hit the arm.

[

 

[Shiny]

Gode to Know.

 

[Ducky]

Depends on the car, my FGMT mounts on the back of the hub, but my FGMacF1 mounts on the front.

 

[Busa169]

Thanks for your helps guys,
Ducky, the ones you have a link to don't work, thats the ones i've had to moddify.

BTB, your cable calipers mount to the side rear, my hydros mount central front.

If I use the standard plastic hubs they mount fine,just wanted a stronger hub, I have since found out that hobbypro do a direct copy of the plastic hub in alloy .I found this out after I had some hubs machined up by J&A Racing , never mind hope this helps someone else in the future.

Thanks
Daren

 

[Ducky]

Those alloy hubs are the norm for a marder, I use the four bolt ones on my MT. What car do you have Darren?

 

[Bigger the Better]

If I use the standard plastic hubs they mount fine,just wanted a stronger hub, I have since found out that hobbypro do a direct copy of the plastic hub in alloy .I found this out after I had some hubs machined up by J&A Racing , never mind hope this helps someone else in the future.
Thanks
Daren

Like these:
http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.1956/.f
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXHUA9&P=Z

What model do you have?