Hi Guys
Here my truck, I did a Baja desert racer theme. Stock 32 with an 1107 carb and a booster pipe. Also stock metal blackbone gearing. All turtle racing and IRP parts. All the sheet metal and vents were hand fabricated. Suspension is full rezzie setup, with a 4 degree toe in,1.5 degree camber and a 2 degree anti squat. This truck hooks up, the IRP rear wing makes a big difference in traction with a 6k clutch spring. I relocated the power and kill switch out side on a panel. I have two ways to fuel the truck, I installed a fuel dot on the panel by the power switch and have an IRP quick fill on the front of the truck. I Have a snappy fuel kit, with killer rc fittings. Using 5/32 fuel line. So here is the trick part, I don't run a fuel clunk, I have a brass fitting 1/8 inch off the bottom of the fuel tank going to a quick fire fuel balancer and filter. This is designed for rc planes and I adapted it to the truck. I have 100% fuel flow with no restrictions and it never starves for fuel and holds about 2 ounces in reserve. The filter gets about 75 tank full before you replace it. I just ordered IRP wheel hubs and will get BRP dirt tires shortly. My big problem is it has too much torque and rips the spokes out of the wheels, its crazy. I hope you enjoy the pics as much as I enjoyed seeing your trucks
View attachment 46039View attachment 46040View attachment 46041View attachment 46042View attachment 46043View attachment 46039View attachment 46040View attachment 46041View attachment 46042View attachment 46043. Machine Head!!!!!
