DBXL 2.0 HELP DBXL 2.0 Problem

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
OCT15

OCT15

Member
Messages
20
Reaction score
26
Hello first and foremost Happy Easter to all at LSF. Alright folks I was running my DBXL 2.0 this afternoon when all of a sudden it won't engage...it was running perfect and NO I WAS NOT BASHING OR RIPPING, NOR HARSH EXCELARATING just doing figure eights and light passes. I don't understand I have no engagement whatsoever...I have perfect excelration just dosen't want go. Does this mean my clutch is bad? I checked the pinion and diff there is perfect contact on both gears. They just spin...the buggy stays put.

Please Help, Thanks in advance
 
Okay I just did a check by turning the rear wheels and the front wheels don't move at all....same goes if I turn the front wheels the rear wheels don't turn at all. Could this be a center diff problem?
 
Rep732 said:
Sounds like you lost a pin in one or more of your dog bones or cv shafts.
Click to expand...
That's exactly what it was...one of the 3mX4m set scews came out. The other one was just about to fall out as well...I tightened that one back up and it engages again. I just ordered a Losi set screw pack. I won't run it until the new screws come in. It was the small center shaft on the rear side...unbelievable!
On the bright side...it won't be an expensive fix.

@Rep732 Thank you
 
Back
Top