HemiStormProducts
Well-Known Member
- Messages
- 99
- Reaction score
- 0
Here's a quick unboxing and first look at my HPI Savage XL Octane. I really like what I see so far!
Last edited by a moderator:
HPI Savage XL Octane up close
- Thread starter HemiStormProducts
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
atom3624
Well-Known Member
Nice presentation as usual, despite the unusual box opening technique!!
What's holding the exhaust manifold onto the engine block - I see 2 holes and no bolts?
Al.
What's holding the exhaust manifold onto the engine block - I see 2 holes and no bolts?
Al.
rcspeedmart
Well-Known Member
Great review as always!!!!!! I loved the comment don't ask me to send you the remote go to another channel for that s*&* LMAO priceless. Some people ask for some wild things!!!!!!!!!!!!
HemiStormProducts
Well-Known Member
- Messages
- 99
- Reaction score
- 0
- Thread starter
- #4
First attempt at getting the Octane to fire up. Patience is a virtue. I'm trying to give you the most honest information I can provide you with. I'm not new to 2 strokes, but this engine has me puzzled.
Here's another video, 3 Savage Octanes. This is not a single car issue. We suspect the ignition unit to be flawed. Also, pay attention to how these 2.4 Ghz HPI radios act when operated together.
Here's another video, 3 Savage Octanes. This is not a single car issue. We suspect the ignition unit to be flawed. Also, pay attention to how these 2.4 Ghz HPI radios act when operated together.
Last edited by a moderator:
atom3624
Well-Known Member
Excellent write up.
We've been following this on MSUK Forum.
To me it seems the higher speed timing is out / engine isn't firing cleanly.
All seem to change 1-2 no problem, but I thought they are 3-speed. I don't hear a change 2-3, unless I'm missing it?
Al.
We've been following this on MSUK Forum.
To me it seems the higher speed timing is out / engine isn't firing cleanly.
All seem to change 1-2 no problem, but I thought they are 3-speed. I don't hear a change 2-3, unless I'm missing it?
Al.
Thanks for sharing, I'll have to watch these as soon as I get out of this meeting. 
@HemiStormProducts you should post these over at www.HPISavageForum.com too!
@HemiStormProducts you should post these over at www.HPISavageForum.com too!
Last edited:
HemiStormProducts
Well-Known Member
- Messages
- 99
- Reaction score
- 0
- Thread starter
- #7
It's running, it's wheelying, it does stoppies, shifts and terrorizes everything in its path! I'm so happy it's running, and running well! Another video on my HPI Octane, spread the word please, this is a car with MASSIVE potential!
Last edited by a moderator:
atom3624
Well-Known Member
Excellent write up.
Just what all of the guys, and HPI I imagine, wanted to see.
Very methodical break in, and good clear thought regarding the process.
I'm concerned about that Walbro thread as well. There are setting locker kits out there. I think with a lot of bashing, they could easily change slightly. If it's that sensitive to settings, they could set it running badly without warning.
Al.
Just what all of the guys, and HPI I imagine, wanted to see.
Very methodical break in, and good clear thought regarding the process.
I'm concerned about that Walbro thread as well. There are setting locker kits out there. I think with a lot of bashing, they could easily change slightly. If it's that sensitive to settings, they could set it running badly without warning.
Al.
k5krazy
Well-Known Member
Are the plugs HPI specific or can they be picked up at an auto parts store? Excellent write up, glad to see these bad boys released!
98NYFinestVette
Well-Known Member
Any chance of using a different ignition on this truck? Mine puked and when I spoke to HPI, they have no parts in stock to repair. My exhaust support spring broke driving around the yard breaking it in.