is this correct......

[evssv]

he built/set it up as per manual.......and he was gonna race it.....is this too much toe......
20181119_214220 by evssv, on Flickr
20181119_214211 by evssv, on Flickr

 

[DougStar]

steering rods total 130mm and from tower to spindle carrier 123mm
it dose look like it too much toe in

 

[evssv]

in.???...u mean out..toe out......

 

[DougStar]

look too much in to the cab side just measure steering rod ect and check

 

[evssv]

ah....I was going by front of the wheel...................yeah in......I`ll chk it .....

 

[DougStar]

mine

 

[evssv]

I`m right..its toe out....
hhm.....mines def toe out more then urs is......

 

[DougStar]

OK TOE OUT!!!!...........................................

 

[evssv]

what's advantage of toe out.....

 

[DougStar]

fast corner exit .....if i remember correctly

 

[evssv]

so set up for track then........better cornering ability ....

 

[crucialRC]

This is a good write up on suspension....http://site.petitrc.com/reglages/BasicSuspensionTuning/

Increased low speed cornering.

 

[DougStar]

possibly ? just looks wrong!!

 

[crucialRC]

That site says to use more of it for low speed tracks. And yes it does look wrong.

 

[evssv]

This is a good write up on suspension....http://site.petitrc.com/reglages/BasicSuspensionTuning/

Increased low speed cornering.

ahhh...I see....I`ll save that........come to thk of it the rear toe is quite in aswell.............

 

[voo2doo]

What does it look like under compression?
It should straighten up.
J

 

[evssv]

I will find out nx time its out....

 

[voo2doo]

Push on th front end now. If the top rods are too high it will start to toe in under compression.
J

 

[crucialRC]

Push on th front end now. If the top rods are too high it will start to toe in under compression.
J

I think you are thinking of camber

 

[voo2doo]

No , I thought someone was going to say that. One of my Hyper 7's had the same problem but when I set the top turnbuckles lower it didn't toe in under compression. Good thinking though.
J