I wasn't a fan of the street sweepers, they were very heavy and caused the wheels to wobble when you turned going fast. Try out the super grips for a baja rear, much better suited for street driving.
J’s dirty 30
- Thread starter Dirty30J
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Thread starter
- #162
I will check those out, thanks!
- Thread starter
- #163
About a week ago I was trying to start my truck here, and it didn’t, so I figured I flooded it. No biggie I’ll just dump it and give it some time to drain into the pipe. Well then the damn engine just got stuck and I decided I would pull the engine and see what’s up. The coil came loose and was dragging on the flywheel.
Can that cause the coil to get damaged? It did have some bent layers. Now I wonder if the coil was bad when I was trying to start it since I never heard it pop in choke.
Can that cause the coil to get damaged? It did have some bent layers. Now I wonder if the coil was bad when I was trying to start it since I never heard it pop in choke.
The coil will be fine just tap them back straight. The coil being out of adjustment and dragging will cause a no start.
- Thread starter
- #165
I mounted it up with the business card spacing and I for sure have no spark at the plug, nor does it spark through the test tool. Chinesium
Ah then yea toss it, their cheap enough to replace.
- Thread starter
- #167
After having dialed in the settings on the 1107, I decided I’d like to try a 15mm Fujiwara carb, a zenoah lightened flywheel, and I went back to the zenoah composite clutch with the orange 9500rpm spring. Hopefully the mail man has my OBR intake and carb insulator today.
I was able to get the zenoah flywheel to work with my Rovan easy start.
I was able to get the zenoah flywheel to work with my Rovan easy start.