Ok so at the minute I have a stock spur 58 tooth and a vertigo 21 pinion?? what I wanna do is slap on a 56 spur and a 22 pinion ??? pushing these gears will be my OBR 34cc piston port?? what are you thoughts ?
Losi gearing
- Thread starter DougStar
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Messages
- 13,208
- Reaction score
- 22,962
Go for it. Worst you will do is want to drop your pinion down a few teeth. I'd try the 56-21 before I jumped to the 22.
- Thread starter
- #3
56 21 is plus two teeth 56 22 is plus three
So if I just did a 22 its plus 1?
Here is the chart
So if I just did a 22 its plus 1?
Here is the chart
- Messages
- 13,208
- Reaction score
- 22,962
Ah I see. Yeah I'd go 22 pinion then.
- Thread starter
- #5
it also has what insert to use with each gearing option
?
the stock insert is a 20 ....so got that
so if i got it the 22 56 with 20 insert all good or if i just run the 22 pinion by its self all i need to do is reverse the 20 insert
its an all round win
?the stock insert is a 20 ....so got that
so if i got it the 22 56 with 20 insert all good or if i just run the 22 pinion by its self all i need to do is reverse the 20 insert
its an all round win
- Messages
- 13,208
- Reaction score
- 22,962
Yeah I never knew there were charts like that. Really takes the guess work out of it. Good deal?