My Traveller

[monster]

Thanks mate, I'm using FG shocks all the way around. But I have Baja springs at the back coz the stock FG springs were too soft and it drags my Trav a$$.

What springs do you use mate if you don't mind me asking???

 

[Bigger the Better]

I went to the local auto store and bought a set that would fit that would be less stiff then the FH's but more then the FG's and found them to be just right.:blush:

 

[monster]

Thanks for the info mate, much appreciated...

 

[Bigger the Better]

After thinking about it I pulled the pants down on the shocks and now remember I used a rubber tubing spacer on top and bought lighter shorter springs. I guess you could buy more spacers for the shock but it works for me. Here are a couple of photos:

 

[monster]

Thanks for those pics mate. You must be using 2.2mm spring or thicker coz with 2mm thick spring the rear end will just drop on its a$$. That's why I'm using the Baja springs coz they're 2.2mm.

 

[Bigger the Better]

I think thats why I needed to use the rubber spacer to make up for the extra room and to adjust the stiffness. The spacer is about 7/8".

 

[monster]

I'm going to buy the FG alloy rear shocks soon and keep the stock ones as spares.

 

[Small2Large]

This is a nice buggy. You still have it?

 

[Bigger the Better]

This is a nice buggy. You still have it?

Doesn't it look cool with the FG Baja tires? The only draw back is it's still not wide enough with them for me.:no:

 

[losidude]

Hi there.

buggy looks awesome :balloon:.nice work.how does handle around corners.my traveller is stock out of the box and rolls over alot.

 

[pipeous]

Doesn't it look cool with the FG Baja tires? The only draw back is it's still not wide enough with them for me.:no:

so toss fh mt arms and bones on, and the long squares. much wider. I am considering a buggy again. love those baja tires.

 

[Bigger the Better]

so toss fh mt arms and bones on, and the long squares. much wider. I am considering a buggy again. love those baja tires.

I never thought of that!:w00t:
Anyone know what the width of the MT arms are?

 

[csp1971]

Looks like Tower Hobbies has all the measurements for the Firehammer MT arms. I'm too lazy to copy and paste.

 

[Bigger the Better]

All I needed to know. Thanks.