New 5ive clutch

[sgerbitz]

Hey guys,

I recently tore down my 5t that i bought used, and i found that the clutch is worn out.. I was wondering if there are any upgrades to the clutch.

The only one i found was the MIP Clutch, it was like 200 bucks, and i was wondering if there is something else?

 

[nitrocat]

Turtle racing it's called the snapper and Largescalerc and DDM has it and it's all steel no short to ware out

 

[sgerbitz]

I was looking at the stock clutch for now, and then found that the clutch bell LOSB5038, and it has 2 screws with it. where do those go? can i get pics

 

[Revolauncher]

I was looking at the stock clutch for now, and then found that the clutch bell LOSB5038, and it has 2 screws with it. where do those go? can i get pics

Right down the center of the clutchbell on to the crankshaft. You only need 1 bolt. They include 2 because they round off easily during install / removal. They have to be super tight and receive a lot of heat during running.

 

[Gross J]

dude look on EBay forget those clutches that wear out TEFLON SHOES...
http://www.ebay.com/itm/1-5-Scale-4...339921?hash=item4d108fc751:g:O3QAAOxyGstSC8vz

 

[crankestein]

I used longer bolts and put a nut at the other end with red locktite.

Hunting scope mounts hex nuts have the flat faces, but with a round side, perfect fit on the clutch bell gear. Between that and properly aligned engine, you'll have no issues.