New Reedy Battery

[Vivek 5T]

Hello,

Im facing a problem with a brand new battery.

Its the 2400mAh 7.4v. Im using the Futaba 3pv with 304 rx.

For servos i have a Hitec 845 and Savox 235.

Super bee kill switch.

Now the issue is.. When i do rapid steering movements the receiver completely cuts off till I restart it.

I have another Dynamite 1750 mAh 7.2v NiMH battery which works fine.

Please help!!

 

[Clubin]

Battery issue.

 

[Rep732]

I'm curious are you using these batteries in the transmitter or the reciever?

2400mah and a 1750mah isn't alot of battery for these things. I run 7000's just for that buffer and run time. I bring 2 with me when I race because after practice I'm changing it out as I'm around 5ish volts. I run 2 high voltage servos and alot of sawing on the steering servo so I'd consider a larger capacity battery in your situation.

 

[Vivek 5T]

I'm curious are you using these batteries in the transmitter or the reciever?

2400mah and a 1750mah isn't alot of battery for these things. I run 7000's just for that buffer and run time. I bring 2 with me when I race because after practice I'm changing it out as I'm around 5ish volts. I run 2 high voltage servos and alot of sawing on the steering servo so I'd consider a larger capacity battery in your situation.

Using it in the receiver.

I agree. But the higher capacity batteries were not available on DDM so had to get this one.

My old battery which was the DDM 7200mAh went bad.