Please Help Program DX3

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
island

island

Well-Known Member
Messages
144
Reaction score
0
Location
Guam USA
Hi guys, I've just received my V1 Kill Switch and would really appreciate it if someone can help me program it to work on my Spectrum DX3? Light on kill switch ain't on so it wont start and when i turn off the radio the light just blinks once also when i turn off radio the receiver light turns on. Please help. Thanks


CDtcwBWkKGrHqNk0EzzdydSjBNBmpRSQ_121.jpg
[/img]
 
what kind of kill switch do you have and how new is your radio if it is the killer bee do you have the SR3000 receiver
 
Last edited by a moderator:
racetruck said:
what kind of kill switch do you have and how new is your radio if it is the killer bee do you have the SR3000 receiver
Click to expand...
Yes i have the sr3000 receiver, the radio and receiver works well just wanted to put a V1 kill switch with it so i can run it on my street.
 
I use V1's with my dx3.0


you need to go into the main menu by holding both the scroll and channel button at the same time then turn radio on. scroll to AUX. this needs to be set to 2P (2 position switch). GBC is next (grip button control) and set that to 2P. turn the radio off then on. now the black button on the hand grip will activate the kill switch. if you have any more problems then just make sure the AUX epa is set to 100% each way
 
pipeous said:
I use V1's with my dx3.0
you need to go into the main menu by holding both the scroll and channel button at the same time then turn radio on. scroll to AUX. this needs to be set to 2P (2 position switch). GBC is next (grip button control) and set that to 2P. turn the radio off then on. now the black button on the hand grip will activate the kill switch. if you have any more problems then just make sure the AUX epa is set to 100% each way
Click to expand...
Hi pipeous, I have a DX3 the older version of the DX3.0 there is no black button on the grip. but i will try all that see what works. Thanks pipeous :)


dx3y1.jpg
[/img]
SPM20300_11.jpg
[/img]
 
Last edited by a moderator:
ya it's much the same. the dx3 you could set that aux to a 3 position (crawler guys liked for rear steer) and I believe there was no channel mixing. otherwise. just need to set the aux to be a switch. rather than off or lap counter ;)
 
Back
Top