pull start access

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
G

Guantanamo Joe

Senior Member
Messages
1,013
Reaction score
0
Location
Guantanamo Bay, Cuba
Quick question for those smarter than me (read: everybody)...


a buddy of mine cut a notch in his MT truck bed to pull the starter handle through and hook it on the outside of the truck... sure does seem to be nice not to have to pull the body off to re-start your truck.


So, my question is this... is that going to hurt anything to have the handle pulled out a few inches at all times? Is there anything else yall do to avoid having to remove these damn pins and pull the body off every time you want to re-start?


Thanks for any input you can provide.
 
Could yall help me my roto start wont work... Could i use a drill to start my hurricane xtr and which direction does the drill need to turn and how much torque or how fast please help thanks guys
 
Midnight2011 said:
Could yall help me my roto start wont work... Could i use a drill to start my hurricane xtr and which direction does the drill need to turn and how much torque or how fast please help thanks guys
Click to expand...
you would need a pretty quick drill and to start it the drill would have to go counter clockwise
 
What I'd like to know if someone could help. If you did make some sort of extender for your pull start would you need to put a longer cord on it also
 
blak__jak said:
What I'd like to know if someone could help. If you did make some sort of extender for your pull start would you need to put a longer cord on it also
Click to expand...
No the standard length rope or cable is plenty long. It's only about 6". When starting you don't pull the entire length out.
 
Back
Top