rx lipo?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

rcpython59

Active Member
Messages
32
Location
minnesota
i got a 3200 2s lipo battery and i want to use it as a rx battery,will it fit,will it work,will i have to buy a lvd system? on a km ksrc-002 buggy
 
Simple answer is YES and NO!!
Check that your Rx and servos can take the higher voltage of 2S LiPo.

If they can't it's no problem.
Get a 6V voltage regulator. LRP do a 6V / 10A regulator.

Not cheap, but could save you quite a lot of money!!!!

Al.
 
i got a 3200 2s lipo battery and i want to use it as a rx battery,will it fit,will it work,will i have to buy a lvd system? on a km ksrc-002 buggy

why bother as atom says works out expensive,its touch and go with

the 6volt receiver batteries as it is, when fully charged can get to 7 volts

K....
 
so 2s is safe?i will get a buzzer then for like 5 bucks off ebay.does anyone know if a dynamite 3200 mah 2s will fit in the km rx tray?
 
NO !!!!!!!!!!!!!!

Some servos don't have a problem.
Some servos have a MAJOR problem.

Check your manufacturer's recommended maximum voltages before you connect - it might be for the last time.

I have Rhinos on my vehicles, and there are plenty of stories of incompatibility with the higher 2S LiPo voltages with these.

Al.
 
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks