Side plate mounting hardware identification

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

neeper

Well-Known Member
Messages
109
Location
Vancouver, Canada
Does anyone know what the FG part number of the front screws are for the side plates?

I don't see it listed in the FG exploded diagrams.

It's a flanged screw with a little bit of a collar where the side plate rests up against.


Side Plate Screw Identification.png
 
Seeing how it goes into plastic its just a course machine screw and it's probably gunna be an m3 or m4 for size. Make sure to get a button head style screw and not a counter sunk one... if you have a local home depot or lowes you'll find what your looking for there, I've found plenty of screws for my rigs there.
 
the flanged collar bit on my fg is nylon and just screws onto the screw itself mate,
not sure if fg changed the collar to be built into the screw on newer models,
but mine is just a 4.2mm self tapper type panhead screw with a nylon collar bit (y),

edit; i think its 4.2mm screw, could be a 5.2mm one :D
 
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks