Suspension Arms

[RcRookie]

Anybody have a tutorial on how to replace suspension arms on a DBXL E 2.0?

 

[DougStar]

Ok step one get some tools??
Step 2 do it
Step 3 enjoy????

 

[Z.hb71]

Look at the manuals exploded view

 

[1Coopgt]

If you don't have the manual download one if you can. Take pictures as you take it apart and put the screws back into the parts as they come off . Then Reverse the process as you put it back together . If the screws are going into metal use a small amount of blue loctite. If a screw is screwed into metal do not force it if it doesn't want to come apart, use a soldering iron or a torch to heat the screw to soften up the old loctite. Big thing is don't rush.

 

[evssv]

 

[RcJunkie13]

This is pretty much how I replace my parts.
1. Grab tools
2. Figure it out
? ?

 

[Seandonato73]

Look at my old dbxl thread "tear the ole girl down" think I covered most of the front and rear tear down on it, the 2.0 is likely set up similar.