Upgrade Aluminum Gear Mount

[Phill2]

hehehe... just wondering coz it didn't have it before the gearplate upgrade anyways

Maybe you have a better mesh now?

My plastic gears lasted exactly 4 minutes so you're doing well.

 

[Phill2]

I thought the Bajer was based on a longer MT Chassis? That is what NitroRCX sells it as.

The one other difference I've found is the air filter is the 2 stage Baja one

There is a shorter wheelbase HSP also called a Bajer which is also 4wd but available in 2wd too

Maybe that's the one you re thinking of

It comes as 26cc whereas the longer one is 30.5

I swappedout my 30.5 for a 29cc 4 bolt Zenoah

 

[Dongskie]

The one other difference I've found is the air filter is the 2 stage Baja oneThere is a shorter wheelbase HSP also called a Bajer which is also 4wd but available in 2wd too

Maybe that's the one you re thinking of

It comes as 26cc whereas the longer one is 30.5

I swappedout my 30.5 for a 29cc 4 bolt Zenoah

Shorter W/B?

Maybe they copied HPI's wheelbase length...

 

[Phill2]

Shorter W/B?Maybe they copied HPI's wheelbase length...

This is the shorter one

https://www.hobbywarehouse.com.au/hsp-94054s-054s-red-bajer-rc-buggy.html

and this is the DR version

https://www.hobbywarehouse.com.au/hsp-94054-54902-blue-rc-buggy.html

 

[mellow30]

i just did the upgrade couple days ago mine makes the same sound. but i have a problem i went over couple of bumps and my clutch aint working how long does the shoes last i ran a gallon of fuel in it

 

[Ice_2k]

The clutch should last a lot longer than that. Are you sure the clutch is the problem?

 

[BertR]

Hi guys,Recently I got and installed my new Aluminum gear plate and it fits well with no trimiming or anything and it looks great too!

Anyway, after I have completed installing the gears and meshing them properly I got a new sound out of it, a whining sound.

I still have the stock plastic gears so I suspect that is is coming from the bevel and pinion form shaft C, but I am pretty sure I meshed them properly

here is a short clip of the whining sound:

How did you properly mesh the gears when you have no adjustments to work with..as for the noise you hear it ma be from the lay shaft is too tight.

 

[BertR]

i just did the upgrade couple days ago mine makes the same sound. but i have a problem i went over couple of bumps and my clutch aint working how long does the shoes last i ran a gallon of fuel in it

Most likely the set screws on the gear square has come loose