Want to buy an xb e and use 8s!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
colafiend2003 said:
See the specs of the motor mounting holes. Generally, the 1/5 scale motors are all the same. It shows on the motor dimensions in their specs.
Click to expand...
Ok I know the 5898 has 6 holes so I'll get the 6 hole one.

It says it's out of stock, I know the owner is active on this forum, what is his name? It's like fartman or fart something
 
colafiend2003 said:
Old fart I think...or Ol fart....he will tell you the cam needed.
Click to expand...

Hey Man,

I decided to ditch the 7075 route because hes not responding and it also seems like too much power!!

So I am going to put this motor: https://www.sagacustomrc.com/store/..._1500kv_smooth_can_designed_by_Steve_Neu.html

This thing is 106mm long which means since your motor wouldn't fit at 110mm and you moved it 4mm, this mean that this motor will be quite a tight fit. This motor is also has the same mount screw configuration so it will fit the stock motor mount. I will then get a Max6 esc and I will be good to go!!! 8s!
 
Okay so I need to move the front chassis brace to the right side of the drive shaft. How do I do that?
 
Just wanted to update you colafiend2003, ol fart came through and is sending me a mount and cam and diff housings.

I have a 5898 on the way!
 
Awesome. I keep waiting for it to stop snowing and dry up to run this monster again. An fyi....DO NOT TRY RUNNING HER INSIDE....lmao...way to big and no stopping it, before it kills a table leg....?
 
uh bro, inside!? hahaha that's hilarious.

I have a leopard 5898 1100kv coming along with KNOBBIE TIRES THAT HAVE MACHINE SCREWS COMING OUT OF THEM. WHAT A COUNTRY
 
Back
Top