WOT When Starting

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
A

alpine4

Well-Known Member
Messages
116
Reaction score
87
Location
Victor, Idaho
So I replaced and cleaned my carb today. Yesterday my car just died and figured it was filthy and I should change the plug. Combination of both fixed the problem. Now when I go to fire her up it goes WOT. For the life of me I can't remember what I setup wrong?
 
Found the problem I had the carb gaskets set in the wrong order. It was dumping fuel into the cylinder. I got it to run for 5 sec but dies. I feel like I am missing a gasket that I scraped off cleaning the carb. Anyone have a diagram so I can see what gasket I am missing?
 
Honestly its easy there should be a gasket in-between every part...gasket between head and isolator. Gasket between isolator and carb. Gasket between carb and air filter housing/ airbox..you should have 3 total..also your gaskets really should go one way..they follow the outline of each part.. the only 2 you can flip flop is the gasket between the air box/housing and the gasket between the isolator and carb...isolator and carb get the ones with the holes...after the carb no little holes in the gasket
 
Last edited:
Back
Top