Losi 5t 2.0 issue help

[Kawigreen4life]

I was running my losi 5t 2.0 ran out of gas now when i start truck it wants to take off like accelerator is stick help any ever go thru this.

 

[DougStar]

Reset your end points on your throttle servo ??

 

[Kawigreen4life]

Reset your end points on your throttle servo ??

On remote

 

[DougStar]

Yes??

On remote

 

[crucialRC]

You could also adjust your idle or LSN.

 

[Basher5iveT420]

Send it to me, I’ll tame it for you! ☝??

 

[Kawigreen4life]

You could also adjust your idle or LSN.

What is lsn

 

[Seandonato73]

Low side needle

 

[crucialRC]

What is lsn

Yeah, Low Speed/Side Needle might need to be fattened or your idle turned down.

 

[Kawigreen4life]

Ok but truck ran normal til i ran out of gas

 

[crucialRC]

Ok but truck ran normal til i ran out of gas

Or you could do nothing and hope for the best bruh.

 

[Top Dead Center]

Have you verified that the throttle plate is closed when the throttle servo is in the neutral position or full brake? If so, then adjust the low speed needle like everyone else suggested. If the throttle plate is open then you will probably need to readjust the anodized collars on the throttle linkage.

And Hi! Welcome to the forum.

 

[Twitchsoft]

If all the above has been done and the problem still remains, try flooding the ever loving piss out of it, wait 5 minutes then give er a go. But I got a feeling one of the above is the issue.

 

[Kawigreen4life]

Thx for feed back i will look into it.

 

[Top Dead Center]

@Kawigreen4life Just checking in with ya to see if you solved your issue.

Another idea that came to mind is that your clutch bolts have come loose and is making contact with the clutch bell.
Keep us posted.

 

[Kawigreen4life]

Thx for i fo
Info