Bobby’s hybrid hack job🤣

[misterleon]

Jc Bob clam dining round yours must be off season or something

I’m not sure what you said, but the way you said it made me laugh

 

[misterleon]

Got the front end 95% finished and everything else I need to finish is on order

started getting the rear together had to Drexel the inner bulkhead to fit around the rcmax diff case. Got the losi shocks mocked up but I will need to drill out the carbon fiber to use the losi shock stand offs. Can I do that without ruining the carbon fiber structurally?


this is how it sits now
Have some more stuff for the rear end in the mail. Huge parts list left to order still
Also looking at the way the rear will sit I think I’ll need the extended shock ends

 

[Z.hb71]

Got the front end 95% finished and everything else I need to finish is on orderView attachment 74186View attachment 74185

started getting the rear together had to Drexel the inner bulkhead to fit around the rcmax diff case. Got the losi shocks mocked up but I will need to drill out the carbon fiber to use the losi shock stand offs. Can I do that without ruining the carbon fiber structurally?

View attachment 74187View attachment 74189
this is how it sits nowView attachment 74188
Have some more stuff for the rear end in the mail. Huge parts list left to order still
Also looking at the way the rear will sit I think I’ll need the extended shock ends

Depends on how much your drilling it out but it will most likely be fine

 

[misterleon]

Depends on how much your drilling it out but it will most likely be fine

Not a lot, maybe from 1/8 to 3/16 or 1/4

 

[RcJunkie13]

Make sure you go up in size slowly and use lubrication on the bit

 

[Z.hb71]

Make sure you go up in size slowly and use lubrication on the bit

Yep, spitting on it is a good move too

 

[MonsterAir]

Huge parts list left to order still

Well then get to ordering! I really wanna see this thing rip around the track a few times!

 

[misterleon]

Well then get to ordering! I really wanna see this thing rip around the track a few times!

can I borrow 2500$

 

[MonsterAir]

can I borrow 2500$

Absolutely! I lend you $2500 and you give me back $4,000usd. Ready to start ordering?

 

[misterleon]

Absolutely! I lend you $2500 and you give me back $4,000usd. Ready to start ordering?

Wait what’s that in terms of pesos?

 

[Rep732]

Mucho denaro!!!!!

 

[MonsterAir]

Wait what’s that in terms of pesos?

You can have it in yen if you'd like. Don't matter to me

 

[misterleon]

Question?!?! Why isn’t the rear bulkhead where it holds the upper hinge pin enclosed? How do I lock the hinge pin so it doesn’t back out?

 

[MonsterAir]

That's where your rear bumper needs to connect. Anti squat plate for bottom I'm just unsure if it depends on cage or not for the top portion.

 

[John Parks]

Bumper dumb dumb

 

[misterleon]

Got it

 

[DougStar]

 

[misterleon]

Ffs Doug Baja’s are stupid. I can’t be expected to know everything

 

[Z.hb71]

Ffs Doug Baja’s are stupid. I can’t be expected to know everything

Kinda think your stupid j/k

 

[Jshaff16]

So you took a box of trash and replaced it with all new parts?