VP racing 110 Fuel in Losi 5ive 2.0??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Nothing like a good oil/ fuel thread.......
Don raiti said:
Yes you will need to drill a few small holes Welch plug has to be removed to get to the low speed circuit. High speed is just a inlet above the needle. Reset pop off at 12 psi . throw out the base gasket take .020 off the piston shirt. I’m running a special case with reads but on a piston port . Math is everything

If you want fancy 7075 parts I got them


you have most of the things needed all ready tigon fuel line e85 diaphragm kit . castor is sticky and it loves heat .don’t know if its worth the time and money I build go ped motors for rich kids that want to hurt themselves. seams like your sport is more about hand eye coordination tires and suspension
Click to expand...
Kevin is that you?🤔
 
Last edited:
Thanks for this. I'm new and i was wondering if buying the premixed stuff or home brew was a better way to go.
 
Watch east side rc guy on u tube. He's got some interesting opinions on fuel and tuning. I've kinda been using some of his theories lately and have noticed an improvement in performance. Only thing I don't do is changing my 25-1 mix ,but I have always run madative, vp, to mix.
 
Mick Mars said:
Watch east side rc guy on u tube. He's got some interesting opinions on fuel and tuning. I've kinda been using some of his theories lately and have noticed an improvement in performance. Only thing I don't do is changing my 25-1 mix ,but I have always run madative, vp, to mix.
Click to expand...
I watched a few of his videos thanks!
 
Back
Top