Search results

Yeah! Yeah! a GiveAwaY!

Count me in please.

ROne21 whats your location? Not sure about UK/EU gas mixtures, but the US is starting to add up to 10% ethanol to the gas. The ethanol added to fuel raises the octane level, when that ethanol evaporates out the octane is lowered, having said that, based on evaporation rates the fuel shouldn't...

Not to re-question your statement: Are you sure it was in the neutral position, before you installed it. I had powered the servo on mine, before installation, and thought the same thing. I replaced mine and ran into a similar issue, I figured if I adjust the horn to slightly negative of...

BTW to everyone : Its all good now.

To get back on track with what the thread starter was having problems with: I was having the same issue. I checked spark, cylinder compression, air, and fuel. It turned out to be the fuel. The carb was trashed, and I finally replaced it with a 813-1, modified with the DDM part #...

I haven't been able to get my hands on a "retired" chainsaw to cannibalize parts from, but I have a basic wiring diagram mocked up in A-Cad.

What kind of motorcycle are we talking about? Street bike, dirt bike, custom?

I don'a have a KB switch as of yet, I have two cars and really really need one, actually I need two, but I'll be greatly satisfied if I just win one gift card.

I sent a PM, let me know if you got it.

I might still have them. The KM001 came with "upgraded" (termed loosely) metal gear servos, and the oem plastics were in the box too. If I still have them you can have them. Although I strongly recommend what others are saying, get a good replacement servo. At any rate, I'll look and PM you.

**Update** Replaced the carb on car#2 with an 813. Car cranked after 3 pulls. Car does not smell like gas anymore. Ordered 813 for car#1 as well, for a backup. THANKS to everyone who helped and offered suggestions.

I personally negotiated with him over the phone. He will gladly give you his cell number. On top of that he did understand taking the sale out of eBay removed the buyers protection and was understanding if I chose the ebay route, but in the end, I bought two from Dan outside of eBay, and they...

Ship to US?

Ordered - If I could hit the thanks button more than once I would. I feel foolish over this.

I was hoping this is/was not the case, but it stands to reason it would be. I did not buy from an RC store I bought it through a small engine repair place. So the carb is completely stock walbro 813. I made plans to go Monday and drop off the old carb other wise I think I can make a copper...

The 813 I have now is a true walbro, and yes there is no center screw.

I can of the old for sure but the new one is sitting with the car at the shop.

I bought a stock walbro 813, what do I need to do to make it fit a KM001. My problem is when I went to put it on there was no set screw hole on the end of the brass rod where the linkage attaches. Could it be possible to remove the rod assembly from the old carb, the chinese one with no name.

**Edit** Went with an 813 since my local stores did not have any of the 668's in stock. But have not had time to put the carb on it yet, and I also took all the shocks off for a rebuild. SO I finally have an update. Yes he had the cars for 3 months. I was in no hurry. The #1 car ran /runs...