5ive t with engine Alx Super 71 Performante

[Termy82]

After many test and bashing session I made a review of my new building .
These are photo of my car :
I mounted a big bore engine ALX SUPER 71 PERFORMANTE with gear ratio 30/44
I think this is the maximum safe power engine that can mount on losi 5ive t platform, I ran for 13 liters of mix without breakage
The engine it’s very powerful and it’s based on a new racing technology malossi mhr flanged 47.6 mm with 7 intake ports
The piston pin rod it’s a 13 mm very big to don’t stress much the ball bearing . The crankshaft is very solid and resistant. The head have a very beautiful multi fin system to cooling the engine .
This is a little bashing session it’s a animal power engine with 21 horsepower

A special tanks to Alx Engine for the great customer support to building this monster

 

[John Parks]

Those tires probably the only thing saving your drivetrain

 

[Termy82]

Those tires probably the only thing saving your drivetrain

I have tested various type of tire Uber rc super spike mad max giant grip an these … with all I hadn’t problem to my reinforced drivetrain

 

[Seandonato73]

7 transfer ports?

 

[John Parks]

I have tested various type of tire Uber rc super spike mad max giant grip an these … with all I hadn’t problem to my reinforced drivetrain

What drivetrain are you using.

 

[Termy82]

7 transfer ports?

Little mistake 7 intake ports

What drivetrain are you using.

I use irc center diff cups
Irc center to front shaft
Flm drivecups flm driveshaft
And pathdad center to rear diff
Helical crown and pinion front and rear

 

[GirthBrooks]

Little mistake 7 intake ports

I use irc center diff cups
Irc center to front shaft
Flm drivecups flm driveshaft
And pathdad center to rear diff
Helical crown and pinion front and rear

What is a helical crown and pinion front and rear ?? Send me the parts on Facebook messenger I'll ask for em !

Those tires probably the only thing saving your drivetrain

What do you mean ? Because he doesn't get good traction aka sparing the hard work it would otherwise put on the drivetrain ? Also noticed he don't use a locker so im assuming if I go that route I would be fortunate and could run aswell ?

 

[RcJunkie13]

What is a helical crown and pinion front and rear ??

that is the way the gear is cut

 

[Rep732]

 

[GirthBrooks]

that is the way the gear is cut

Thanks appreciate it. Trying to learn

Those tires probably the only thing saving your drivetrain

What do ya mean? What is unique to the tire in regards to performance ? If I can ask ?

 

[John Parks]

Thanks appreciate it. Trying to learn

What do ya mean? What is unique to the tire in regards to performance ? If I can ask ?

They spin alot, not much for traction, they hook snap goes the pins and dogbones. Hell my Dawson 46 snaps irc dogbones and factory losi dogbones. Ate pins like butter. Maybe flm is stronger but I doubt it

 

[Termy82]

What is a helical crown and pinion front and rear ?? Send me the parts on Facebook messenger I'll ask for em !

What do you mean ? Because he doesn't get good traction aka sparing the hard work it would otherwise put on the drivetrain ? Also noticed he don't use a locker so im assuming if I go that route I would be fortunate and could run aswell ?

They spin alot, not much for traction, they hook snap goes the pins and dogbones. Hell my Dawson 46 snaps irc dogbones and factory losi dogbones. Ate pins like butter. Maybe flm is stronger but I doubt it

These are photo of my drive pin and cup that have 30 liters of mix with bzm 28.5 and 13 liter of mix with 71 performante
Never change pin…
There are other many people that use big bore on losi 5ive t without problem how
Garrets Khaos that use Alx super 85 without breakage from 2 years
https://m.facebook.com/story.php?st...1CTsLekm56ZCCkQr7aYm7ZoTHl&id=100066595053099

Or John could ridge that use 71 performante in losi 5ive t from 2020 without problem

 

[Termy82]

New video today bashing session

 

[crucialRC]

It's all about how you drive. Rolling starts then get on the power will save your drivetrain. If you YAM on it from the go that's when them pins like to say

 

[Seandonato73]

Little mistake 7 intake ports

I use irc center diff cups
Irc center to front shaft
Flm drivecups flm driveshaft
And pathdad center to rear diff
Helical crown and pinion front and rear

No, 7 transfer ports, it only has one intake with a 3 pedal reed valve if I recall correctly.

 

[Termy82]

New video with Taylor super spike 190 mm for better grip