Anybody using the spektrum SR110 1/5 servo?
- Thread starter Ferrebee88
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
Mick Boomer
Well-Known Member
- Messages
- 724
- Reaction score
- 990
For that price go for a Hilantronics. They are legit servos.
https://www.detroitperformancerc.com/product-page/hilatronics-high-torque-smart-servo
https://www.detroitperformancerc.com/product-page/hilatronics-high-torque-smart-servo
Last edited:
- Thread starter
- #3
I do believe I will pick one of those up. Which would you recomend for the throttle servo?
Bit more money but these are great. Agfrc makes reefs servos. https://amp.agf-rc.com/78kg-hv-0082...ss-waterproof-15-servo-a280bhmw-p3426882.html
Super fast!
Super fast!
That’s a great servo from what I’ve researched. Never owned one. Here is specs on it.
MonsterAir
Lone Racer 🤠
Yes I ran one this fall. Excellent servo, powerful and fast plus I only ran it on NIMH batteries. @misterleon recommended it to me as he runs them too.
It will suffice in anything except maybe a Raminator
It will suffice in anything except maybe a Raminator
Mick Boomer
Well-Known Member
- Messages
- 724
- Reaction score
- 990
one thing i also love about hilantronics servos is, the led indicator. It tells you if your battery voltage is low.
- Thread starter
- #7
That servo shows the speed @.22 for 7.4v. Will that be on the slow side? I'm used to 1/8 where you want .15 or faster.
Mick Boomer
Well-Known Member
- Messages
- 724
- Reaction score
- 990
Shear torq is what you want. Especially with the vekta. Its very heavy. You talk about 1/8 scale and speed. Thats for racing conditions. You planning on racing or bashing the Vekta?
- Thread starter
- #9
I'll take your word for it. I definitely won't be racing. I am assuming it would be a good servo for throttle/brake too?
Mick Boomer
Well-Known Member
- Messages
- 724
- Reaction score
- 990
I used the kraken servo for the throttle-brake.
A safe rule of thumb is rtr servos go in the garbage. They are built to a price point.
Mick Boomer
Well-Known Member
- Messages
- 724
- Reaction score
- 990
Don’t forget a killswitch
- Thread starter
- #13
Yup! I plan on getting the super bee
I run the s9120 but the 9110 is awesome also. The only steering servos I run
Vekta .5 is very nose heavy so yea you want a torque servo.
- Messages
- 43
- Reaction score
- 45
The AFGRC servos are the poop I got two of them and I also got two of the hiltronics and the hiltronics broke but the afgrc servos are still going strong they are brushless unlike the Hiltronics ones and if you can get the 100KG afgrc ones you have to run them with a 4 s battery pack and you have to get a voltage regulator which adds to the cost but the servos are the same price whether you get the 100kg ones or the 78kg ones of course with a 4s battery you don't have to worry about charging the battery as often