Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Your dynamite switch didn't work?Mine did not work at all, threw it in the trash were it belongs. (dynamite switch).
Mine works great. I guess it's like everything else, good ones and bad ones no matter what the brand or cost lolIt did absolutely nothing, and.the jumpers kept falling off, pissed me off, chucked it in the garbage. Done, got it out of my life.
PS: my issue was with a Rovan. Little left of Rovan though but the clutch carrier and I think the bell were Rovan.Resurrecting the original post because I've had the same issue with the ddm and came across this.
There's a 2mm recess on the inside of the ddm. I'm told if you have a 1mm bell it will rub. The Vertigo vented hex bell is 3 mm.
OP probably had 2 mm movement in and out as well. Could have shimmed 2 mm on the inside to use the ddm but they don't tell you that. ddm are happy to sell to clone owners but they use the 'designed for hpi' excuse if you have an issue without stating anywhere that there may be compatability issues.
I'm assured by the manufacturer of another carrier that I won't have the issue because the bearings are flush on the inside. I've ordered one. Not sure on the movement in and out with the new carrier and the same bell (ordered a new one the same) but I know to look now and will use their bell if I need to. The poor experience means I now check for depth of the bell and any other issues.
TBH I think the ddm bell is garbage anyway. The tolerances on it are way too small. My bell was rubbing on a spot on the circumference as well. There might have been a high point on the bell due to a rust spot but there also would need to be a low point on the bell or for it to be out of round for it to only rub in one area.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Large Scale RC community for RC enthusiasts that covers all aspects of the Large Scale RC!
Register Today It's free! This box will disappear once registered!
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.