Crawler Talk

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Prodrvr1 said:
Thanks! Hope it performs well. I’ve never had a rig with a 2 speed transmission and remote locking diffs.
Click to expand...
I have Traxxas that has those options. This is what got me started in crawling.
It is pretty cool to have those options at your fingertips. Great to be able to blast down the dirt trail and then shift to low and crawl.
Almost like two vehicles in one.

You should really enjoy it.
 
I built a vanquish 4sv-10 a while back that had fully controllable transmission. I could freewheel the front, rear, or both and also lockup the rear. It was fun to build and set up.
 
What about a Bomber that i need to finish or sell. Maybe this round of my RC hobby i will get it done.

EmeryworX RR10 Bomber Chassis #001 of 001

I had commissioned this chassis to be built in March 2016 by a company called EmeryworX Fabrication. He went by tuner on RCCrawler and if still in business probably on Fakebook. I started the build with a no expense spared attitude, but life changes made me get out of the hobby shortly thereafter and it was 85-90% completed.

Vehicle Build Specs:
EmeryworX RR10 Bomber Chassis #001 ** Probably the only one he made **
BarnDog Body Panels

Electronics:
Mamba Max Pro
BEC - Castle Creations; 10-Amp @7.4v
Tekin ROC412 2300KV
Hitec HS-8380TH Servo (.14 sec/60 - 486 oz-in @7.4v)
Robitronic Aluminum Horn; 23T
Custom Servo Plate (Custom made by cmbscx10)
RCBros Servo Mounts
Holmes Hobbies Receiver Bypass
Receiver - Spektrum SR3100

Drive Train-Front Axle:
Axial AR60 Axle
Beef Tubes Steel
GripFab SS Spool
Axial Heavy Duty Bevel Gear Set 38T/13T
Vanquish Wraith VVD V1-HD 5mm Stubs
Vanquish Wraith Scale Chubs 8deg Silver
Vanquish Wraith Scale Knuckles 8deg Silver
Vanquish Knuckle Bushings
HR Shock/Link Mounts; Black
SSD Titanium Steering Links for Wraith
MIP X-Duty C-Drive Spline Center CVD MP08136 w/ SS Exclusive X-Duty MIP Male Bone; Front
MIP X-Duty C-Drive Spline Center CVD MP08136 w/ MIP Male Bone Spline MP9169; Rear
MIP 6mm Bore Spline CVD Hub
Diff Cover - RC4WD ARB Orange
Black-n-Tacky

Drive Train-Rear Axle:
SSD Diamond Centered Axle for Wraith; Grey
SSD Skid for Diamond Axle
Vanquish Shock/Link Mounts; Red (Will D-Ano on 1st teardown)
GripFab ARB Locker
Axial Heavy Duty Bevel Gear Set 43T/13T
Lucas Red-n-Tacky

Transmission Super Shafty Bullet Proof Trans Clone (built by cmbscx10):
Skid Plate - Axial; Stock RR10 Bomber
DMG Adapter Plate
VP AX10 Housing
VP Motor Plate & Gear Cover
HR Metal gears
SuperShafty 6mm Extended Outputs F/R
SuperShafty Top Shaft
Robinson HD Slipper
FE bearings
Pinion Gear - Robinson Racing 12T/32P
Spur Gear - Robinson 56T/32P
Lucas Red-n-Tacky

Suspension Links:
Upper Front Links - Vanquish Titanium; Wraith
Lower Front Links - Vanquish Titanium; Wraith
Upper Rear Link - Incision Yeti 1/4" Stainless Steel w/Revo Link Ends
Dlux UCfab RR10 Bomber Trailing Arms w/Revo Link Ends

Suspension:
Vanquish Currie Antirock Yeti Sway Bar
Traxxas Big Bore Shock (XX-Long) TRA2662 (103mm E2E); Front
Traxxas Big Bore Shock (XX-Long) TRA2662 (103mm E2E); Rear
RC4WD King Dual Spring Shock; (120mm); Rear Springless
Shock Spring - Axial 14x70mm 1.43 lbs/in - Purple (Blue Springs); Front
Shock Spring - Axial 14x70mm - 3.29 lbs/in - Yellow (Blue Springs); Rear
Shock Fluid - Traxxas; 30w; Front
Shock Fluid - Traxxas; 30w; Rear
Shock Fluid - Factory Team; 40w; Rear Springless (120mm)
KBess Mfg Wraith Blue Limiting Straps; Front
KBess Mfg Yeti Orange Limiting Straps; Rear

Wheels/Tires:
Locked Up RC Gear Jammer 2.2 SLW, Snowman Rings, 4-40 Scale Acorn Wheel Studs, Scale Zinc HW; Front/Rear
VP SLW Hex Hubs - .475; Front/Rear
Hex - Axial 12mm Aluminum
Hex Pins - Axial
Pit Bull RB2's; Front/Rear
Foams - Crawler Innovations DDeuce 6.0” Comp Cut Inner /Med Outer; Front/Rear


Lighting:
MEMA Engineering Alien Light Bar - 800 Lumens Alien Light Bar **
Vanquish Products Rigid Industries 1" LED Light Bar Silver; Front
RC4WD Baja Designs Squadron Pro LED Lights; Front
Axial AX80103 Rear Light Bezel; Rear
Axial AX80049 LED Lens Set Yellow/Clear; Rear
HeyOK KOH and Brake Light Controller w/LED's; Rear
** I have no way to measure but that is the claim

Scale Accessories:
RC4WD Aluminum Fuel Cell
RC4WD 1/10 Hi-Lift Jack
Screwdriver (Custom made by cmbscx10)
CB Antenna (Custom made by cmbscx10)
ABC Fire Extinguisher (Rattlesnake Toys)
Axial RR10 Bomber Interior
LED Voltmeter/Speedometer ** Credit to WesleyRoy for idea

Credits:
Credit to those who inspired my build ** Don't get butt hurt if your name is not on the list. Credit goes to many and i thank everyone for making me feel like i did when i received my Tamiya Frog at 6yo.
  • tuner (EmeryworX) for building me such an awesome chassis
  • bilinvic
  • 2-shot
  • mjderstine (Super Shafty)
  • Krazykrawler
  • Screamer
EmeryworX RR10 Bomber Pics

8B3D7F7F-73DA-4EDB-AC50-DDCBF9846400_zps3vsanlgg.jpg46F27C36-CD84-4A99-99DE-9CEFB26E4317_zps1pilsfnd.jpgIMAG0609.jpgIMAG0616.jpgIMAG0622.jpgIMAG0630.jpgIMAG0635.jpgIMAG0672.jpgIMAG0673.jpgIMAG0998.jpg20240221_134648.jpg20240221_134909.jpg
 
jeepfreak1972 said:
Dang strait bud!
Click to expand...
Wow his chassis aren’t cheap. 🤯
cmbscx10 said:
What about a Bomber that i need to finish or sell. Maybe this round of my RC hobby i will get it done.

EmeryworX RR10 Bomber Chassis #001 of 001

I had commissioned this chassis to be built in March 2016 by a company called EmeryworX Fabrication. He went by tuner on RCCrawler and if still in business probably on Fakebook. I started the build with a no expense spared attitude, but life changes made me get out of the hobby shortly thereafter and it was 85-90% completed.

Vehicle Build Specs:
EmeryworX RR10 Bomber Chassis #001 ** Probably the only one he made **
BarnDog Body Panels

Electronics:
Mamba Max Pro
BEC - Castle Creations; 10-Amp @7.4v
Tekin ROC412 2300KV
Hitec HS-8380TH Servo (.14 sec/60 - 486 oz-in @7.4v)
Robitronic Aluminum Horn; 23T
Custom Servo Plate (Custom made by cmbscx10)
RCBros Servo Mounts
Holmes Hobbies Receiver Bypass
Receiver - Spektrum SR3100

Drive Train-Front Axle:
Axial AR60 Axle
Beef Tubes Steel
GripFab SS Spool
Axial Heavy Duty Bevel Gear Set 38T/13T
Vanquish Wraith VVD V1-HD 5mm Stubs
Vanquish Wraith Scale Chubs 8deg Silver
Vanquish Wraith Scale Knuckles 8deg Silver
Vanquish Knuckle Bushings
HR Shock/Link Mounts; Black
SSD Titanium Steering Links for Wraith
MIP X-Duty C-Drive Spline Center CVD MP08136 w/ SS Exclusive X-Duty MIP Male Bone; Front
MIP X-Duty C-Drive Spline Center CVD MP08136 w/ MIP Male Bone Spline MP9169; Rear
MIP 6mm Bore Spline CVD Hub
Diff Cover - RC4WD ARB Orange
Black-n-Tacky

Drive Train-Rear Axle:
SSD Diamond Centered Axle for Wraith; Grey
SSD Skid for Diamond Axle
Vanquish Shock/Link Mounts; Red (Will D-Ano on 1st teardown)
GripFab ARB Locker
Axial Heavy Duty Bevel Gear Set 43T/13T
Lucas Red-n-Tacky

Transmission Super Shafty Bullet Proof Trans Clone (built by cmbscx10):
Skid Plate - Axial; Stock RR10 Bomber
DMG Adapter Plate
VP AX10 Housing
VP Motor Plate & Gear Cover
HR Metal gears
SuperShafty 6mm Extended Outputs F/R
SuperShafty Top Shaft
Robinson HD Slipper
FE bearings
Pinion Gear - Robinson Racing 12T/32P
Spur Gear - Robinson 56T/32P
Lucas Red-n-Tacky

Suspension Links:
Upper Front Links - Vanquish Titanium; Wraith
Lower Front Links - Vanquish Titanium; Wraith
Upper Rear Link - Incision Yeti 1/4" Stainless Steel w/Revo Link Ends
Dlux UCfab RR10 Bomber Trailing Arms w/Revo Link Ends

Suspension:
Vanquish Currie Antirock Yeti Sway Bar
Traxxas Big Bore Shock (XX-Long) TRA2662 (103mm E2E); Front
Traxxas Big Bore Shock (XX-Long) TRA2662 (103mm E2E); Rear
RC4WD King Dual Spring Shock; (120mm); Rear Springless
Shock Spring - Axial 14x70mm 1.43 lbs/in - Purple (Blue Springs); Front
Shock Spring - Axial 14x70mm - 3.29 lbs/in - Yellow (Blue Springs); Rear
Shock Fluid - Traxxas; 30w; Front
Shock Fluid - Traxxas; 30w; Rear
Shock Fluid - Factory Team; 40w; Rear Springless (120mm)
KBess Mfg Wraith Blue Limiting Straps; Front
KBess Mfg Yeti Orange Limiting Straps; Rear

Wheels/Tires:
Locked Up RC Gear Jammer 2.2 SLW, Snowman Rings, 4-40 Scale Acorn Wheel Studs, Scale Zinc HW; Front/Rear
VP SLW Hex Hubs - .475; Front/Rear
Hex - Axial 12mm Aluminum
Hex Pins - Axial
Pit Bull RB2's; Front/Rear
Foams - Crawler Innovations DDeuce 6.0” Comp Cut Inner /Med Outer; Front/Rear


Lighting:
MEMA Engineering Alien Light Bar - 800 Lumens Alien Light Bar **
Vanquish Products Rigid Industries 1" LED Light Bar Silver; Front
RC4WD Baja Designs Squadron Pro LED Lights; Front
Axial AX80103 Rear Light Bezel; Rear
Axial AX80049 LED Lens Set Yellow/Clear; Rear
HeyOK KOH and Brake Light Controller w/LED's; Rear
** I have no way to measure but that is the claim

Scale Accessories:
RC4WD Aluminum Fuel Cell
RC4WD 1/10 Hi-Lift Jack
Screwdriver (Custom made by cmbscx10)
CB Antenna (Custom made by cmbscx10)
ABC Fire Extinguisher (Rattlesnake Toys)
Axial RR10 Bomber Interior
LED Voltmeter/Speedometer ** Credit to WesleyRoy for idea

Credits:
Credit to those who inspired my build ** Don't get butt hurt if your name is not on the list. Credit goes to many and i thank everyone for making me feel like i did when i received my Tamiya Frog at 6yo.
  • tuner (EmeryworX) for building me such an awesome chassis
  • bilinvic
  • 2-shot
  • mjderstine (Super Shafty)
  • Krazykrawler
  • Screamer
EmeryworX RR10 Bomber Pics

View attachment 92927View attachment 92928View attachment 92929View attachment 92930View attachment 92931View attachment 92932View attachment 92933View attachment 92934View attachment 92935View attachment 92936View attachment 92937View attachment 92938
Click to expand...
Wicked!!!! 😎
 
Back
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks