- Thread starter
- #1,141
Yeah this was just my local auto shop
D's HPI twin build
- Thread starter DougStar
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Thread starter
- #1,142
While the twin was getting measured up Simon brought out his twin rmck water cooled 57 
look completely different to my motor very complicated with all the hoses .
Also had the same firing order as my m8's twin that I did the head kit on
rmck water cooled 57 look completely different to my motor very complicated with all the hoses .Also had the same firing order as my m8's twin that I did the head kit on
- Messages
- 19,475
- Reaction score
- 27,691
sounds like yours is special, like its its ownerWhile the twin was getting measured up Simon brought out his twin
Also had the same firing order as my m8's twin that I did the head kit on
View attachment 78479View attachment 78480View attachment 78481
- Thread starter
- #1,144
My guess its coz this one and me M8' have old style crank with the key180 degree opposite to mine .....boat motors
- Messages
- 19,475
- Reaction score
- 27,691
that is probably it
John Parks
Print my own
- Messages
- 4,151
- Reaction score
- 9,679
His looks like quite the clusterfuck. Always wondered why other than alx, a nice single intake manifold was never released
- Thread starter
- #1,147
- Messages
- 13,208
- Reaction score
- 22,962
Wouldn't be hard to fab one up really. 2 piece design with oring seal, pretty straight forward really, could even do a single piece with a bit of ingenuity.
- Messages
- 1,343
- Reaction score
- 3,089
Hey Doug,
Is this just a standard bracket or is it thinner than standard? Also do reckon a standard bracket would fit the 54mm clutch setup or do you need the super fat one that comes with the kit?
Cheers dude.
Is this just a standard bracket or is it thinner than standard? Also do reckon a standard bracket would fit the 54mm clutch setup or do you need the super fat one that comes with the kit?
Cheers dude.
- Thread starter
- #1,150
Which bracket you talking about?..... you talking the clutch side brace the clutch housing sits out further than a regular motor so yes you need the fat one. Mine has the alx clutch so the fat one doesn't fit i use the alx one
the clutch housing sits out further than a regular motor so yes you need the fat one. Mine has the alx clutch so the fat one doesn't fit i use the alx oneHey Doug,
Is this just a standard bracket or is it thinner than standard? Also do reckon a standard bracket would fit the 54mm clutch setup or do you need the super fat one that comes with the kit?
Cheers dude.
- Thread starter
- #1,151
