JACKDADDY83
Well-Known Member
- Messages
- 421
- Location
- Denver,Co
- Thread starter
- #181
The horn will not angle around The linkagePut the horn on the linkage first then put it on the servo
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The horn will not angle around The linkagePut the horn on the linkage first then put it on the servo
There's a technique to it. U have to put the linkage in the hole on the horn, then force It around the linkage. Lemme see if I can make a videoThe horn will not angle around The linkage
Yeah that won't work. I have one exactly the same, just tried it and it won't go, if u force it, it will bend the linkage. If you ground it down should workI don't think this horn will work there is an extra lip on the horn that won't allow linkage to Zigzag through
Ur Welcome, I still have the plastic horn, works good?Yea but then it will be ugly lol I'll just keep the plastic one on??? thanks bro
Was alittle skeptical about the diamond plate but now when I see it, looks great! Good idea!Had to order another 1"to1" silicone coupler the 1.25"to1.25" was to big in diameter and wasn't sealing correctly got the diamond plate mod installed "SWEET"
??? Wasn't doubting just don't usually think diamond plate looks good on anything except for garage flooring, I was wrong apparently ?Come on bro bro don't ever doubt me lol I was skeptical at first too ?????????
That also would look sick?? cant wait to see it. Might do some plates on my truck with sum red carbon kevlarYes definitely in the rear bumper I kinda like the look of the front skid plate with the sharp lines and possibly here
i haven't used it yet. does have bigger ID fuel lines tho so should have better flo. need to get sum for my 70cc baja. will need more floYea bro that look sweet details! details! What you think about the full force v2 fuel kit you think is worth it....? fuel delivery speaking
Yeah but it it's like drinking from one of those hollow coffee stirring things, you can succ (lol) all u want but that stirrer will only allow Soo much. That's how I see it@JACKDADDY83 Depends on your set up.... were not talking about a huge difference in line size. The bulk head fitting will help more then the hose. They are supposed to be the same size as the I.d. of the fuel line. Not necked down for convenience of manufacturing.
@Z.hb71 your carb on your 70cc will flow as much fuel as it needs if you have it set up right. One of the great things about bigger diaphragm carbs is they have bigger fuel pump built right in! Like inside before the bulkhead fitting in the tank are the restriction point.
It's when the liquid petrol changes from a liquid form to a gas while still in the fuel delivery system. The ffrc hi flow won't prevent vapor lock, it will just give u more flow and b less restrictive. The stock Baja fuel system is prone to having vapor lock, so the way to fix that is buying the snappy rc vent kit, it's great. Never had vapor lock again, it leaks a tiny bit when u first fill up the tank but after a few seconds it will stop and just whipe it off. HereThe main reason is I think im getting vapor lock but not sure how it works what is vapor lock?
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Large Scale RC community for RC enthusiasts that covers all aspects of the Large Scale RC!
Register Today It's free! This box will disappear once registered!
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.