Kv5 TT TRC 65

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Braap2smoke

Well-Known Member
Messages
76
Location
Bay Area,California
what are you guys using to keep the exhaust flange from backing out? I seem to keep having this issue even with red loctite. Are there different style nuts to use?
 

Attachments

  • 7484F948-3B02-4145-8A83-1A582BE249E2.jpeg
    7484F948-3B02-4145-8A83-1A582BE249E2.jpeg
    113.9 KB · Views: 15
what are you guys using to keep the exhaust flange from backing out? I seem to keep having this issue even with red loctite. Are there different style nuts to use?
I used blue loctite and gave it 2 days to cure no issues on my 65 and 50
You can try a longer bolt and use a second nut. I also seen people drill a hole for a pin behind the nut
 
Thx for the replies. Im gonna try to dig into it tonight and see if it was the nut or the stud.
On a side note my vekta 5 with obr 32 has a turtle racing clutch in it and so far not a good experience with it. Ive used loctite per the instructions and it seems to always back out. Im gonna just put the normal clutch in it. And their pull start was nothing but headaches as it would bend the recoil speing after a few pulls. 🤦🏻‍♂️
 
Had a rollover on turf turning around… didnt think it was that bad til i seen a fin on the head got bent. All part of bashing.
 

Attachments

  • 0A80C7C8-5510-4FA9-877D-C35D4A8E55A7.jpeg
    0A80C7C8-5510-4FA9-877D-C35D4A8E55A7.jpeg
    168.4 KB · Views: 18
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks